|
| |
2007 AADE
National Technical Conference
and Exhibition
"Technology for the Crew Change"
Barite Sag
BHA Design
-
An
Integrated Approach toMinimizing Shock and Vibration Damage
- Goke Akinniranye, Hesham Elsweisy, Roger Goobie,
Julio Palacio, Benny Poedjono, and Andrea Bautista Gomez, Schlumberger
[#04]
-
Successful
application of Point-the-Bit Rotary Steerable to Sidetrack from
Formation with High Compressive Strength - A.
Perez, F. Rashid & P. Colbourne, Schlumberger [#74]
-
Large
Hole RSS for Shallow Kick Off - Directional Control in Soft Sediment
- Riaz Israel, Osman Maung, Koke Akinniranye, Ravikumar
Peddibholta, Schlumberger [#06]
Bit Design
-
Geometry
and Placement of Torque Control Components - How Does this Affect
Torque Response with FC Drill Bits? - Steve
Barton, Henry May and Simon Johnson, ReedHycalog [#07]
-
Analysis
of PDC Bit Selection with Rotary Steerable Assemblies in the Gulf of
Mexico - Edward Moore and G. Akinniranye,
Schlumberger; C. Guerrero, Chevron [#08]
-
Advances
in Steel Tooth Technology Pushing PDC out of GoM Applications
- Bobby Grimes, R. Buske, J. Dick and W. Thompson,
Hughes Christensen; S. Pullen, Mayne & Mertz [#09]
-
Modeling
of the Effects of Cutting Structure, Impact Arrestor, and Gage
Geometery on PC Bit Steerability - Shilin
Chen, Rob Arfele & Kevin Glass, Halliburton [#10]
Case Histories
-
Proactive
Geosteering with Directional Deep Resistivity and Rotary Steerable
Tool in Thin CBM Reservoirs - E.
Christiaansen, D. Bouregous, Schlumberger; C. MacDonald, K. Longmuir,
Quicksilver; T. Natras and I. McIlreach, EnCana [#13]
-
BHA Selection and
Drilling Practices to Successfully Drill and Underream Difficult
Deepwater GOM Salt Sections, a Case History - Shola
Okewunmi, Marcus Oesterberg, Gerald Heisig and James Hood, Baker
Hughes INTEQ [#11]
-
Accurate
Placement of Vertical Wells with Rotary Steerable System Technology
- Goke Akinniranye, A. Bautista Gomez, B. Poedjono, B.
Dubose, R. oobie, & J. Hobin, Schlumberger; W. Kruse, Houston
Exploration [#12]
Cementing
Completions
-
Building a Better Pack
Using a Solid-Free Non-Aqueous Carrier Fluid for a-ß Wave Gravel
Packs - Lirio Quintero, Alex McKeller and Jason
Maxey, Baker Hughes Drilling Fluids; Allen Gabrysch, Baker Oil Tools;
Atila Aragao, Agostinho Calderon, Andrea Sa and Andre Martins,
Petrobras [#17]
-
Single-Phase
Microemulsion Technology for Cleaning Oil or Synthetic-Based Mud
-
Lirio Quintero, Tom Jones, David Clark, Cristina
Torres, and Chad Christian, Baker Hughes Drilling Fluids [#18]
Drilling Fluids I
-
Increased
Deepwater Drilling Performance using Constant Rheology Synthetic-Based
Mud - Juan Carlos Rojas, Bill Daugherty &
Doug Renfrow, BP America; Peter Bern, BP Exploration; Bob Greene,
Roger Irby, Bill Gusler, Pat Grover, Neil Trotter & Billy Dye,
Baker Hughes Drilling Fluids [#20]
-
Enhanced Lost
Circulation Control Through Continuous Graphite Recovery - Eric
van Oort, Shell; Tim Browning, Frank Bugtler, John Lee & Jim
Friedheim, M-I SWACO [#24]
-
High Salinity,
Low Activity Oil Mud Improves Performance in Near-Salt Drilling
-
Harry Dearing, Newpark Drilling Fluids; Larry Flak,
Swift Energy [#22]
Drilling Fluids II
-
How to Maintain
Wellbore Stability in Deepwater Non-Consolidated Productive Sands by
Using Calcium Carbonate Flakes in Water-Based Drilling Fluid -
M. Ramirez & E. Moura, Baker Hughes Drilling
Fluids; R. Passanha, A. Azebedo & G. Texeira, Petrobras [#70]
-
Improved
Drilling Performance in Lake Maracaibo Using A Low-Salinity
High-Performance Water-Based Drilling Fluid
- Julio
Montilva, PDVSA; Eric van Oort, Shell; Ricardo Brahim, Billy Dye, Juan
Luzardo, Mike McDonald and Lirio Quintero, Baker Hughes Drilling
Fluids [#21]
-
The Design of
High Performance Drill-In Fluids with a View to Maximizing Production
and Minimizing Cost - Louise Roedbro and
Andrew Stewart, Maersk Oil; Shuangjiu Peng, Mike Hodder and Jarrod
Massam, M-I SWACO [#23]
Drilling
Management
Emerging
Technology
Expandables
Managed
Pressure Drilling
-
Optimizing
Reservoir Characterization During Underbalanced Drilling -
Sara Shayegi, Isabel Gil, and Joe Ansah, Halliburton
[#42]
-
Pressure
Transient Lag Time Analysis During Aerated Mud Drilling - Arash
Haghshenas, J. Schubert, A. Paknejad and B. Rehm, Texas A&M Univ.
[#40]
-
Comparison
of Under-Balanced and Managed-Pressure Drilling Techniques
- Kent Ostroot, Sara Shayegi, Derrick Lewis and Randy
Lovorn, Halliburton [#39]
-
A
New and Simplified Method for Determination of Conductor Surface
Casing Setting Depths in Shallow Marine Sediments (SMS)
- Amirsaman Paknejad, J. Schubert and A. Haghshenas, Texas A&M
Univ. [#41]
Real-Time
Technology
ConocoPhillips
Onshore Drilling Centre in Norway - A Virtual Tour of the Centre
including a Link up with Offshore - Mike
Herbert, Reagan James and John Aurlien, ConocoPhillips, Norway [#44] -
Low-Cost
Mobil OSC - an Effective Alternative to Dedicated Drilling Centers
- Roger Goobie, R. Clyde, J. Brannigan, G. Akinniranye,
P. Dambrosio, H. Elsweisy, Schlumberger; S. Robinson and N. Lirette,
BP America [#43]
Demonstrating
a New System for Integrated Drilling Control - F.
Iversen, E. Cayeux, E. Dvergsnes, Intl Res Inst. of Stavanger; M.
Welmer, NOV; A. Torsvoll, Statoil; A. Merlo, ENI [#45]
Rheology
Hydraulics
Rotary
Steerables
Software
Modeling
Solids
Control
-
Cut-Point
Data: Relevant, Irrelevant, or Irreverent? - Syed
Zafar, Schlumberger [#50]
-
API
RP 13C D100 Values, Split Curves, and Separation Efficiency
- Thomas Larson, Brandt NOV [#53]
-
Minimizing
Waste during Drilling Operations
- Richard
Haut, Houston Advanced Research Center; John Rogers, Noble Corp.;
Bruce McDole, BP America; David Burnett and Oluwaseun Olatubi, Texas
A&M Univ. [#54]
Specialty
Drilling
Training
Waste
Management
Wellbore
Stability
|
